Home > Products > Centrifuge > Basket Centrifuge > HR
  • HR Pistons Pushing Centrifuge

HR Pistons Pushing Centrifuge

HR pistons pushing centrifuge is a kind of filter centrifuge that adopts continuously feeding and intermittently pushing out.It can carry all procedures as feeding,separating,washing,discharging and etc on a full speed.

product description

Main characteristics

HR pistons pushing centrifuge is a kind of filter centrifuge that adopts continuously feeding and intermittently pushing out.It can carry all procedures as feeding,separating,washing,discharging and etc on a full speed.

It has the following distinctive features:

1.It can be operated continuously and steadily,which capacity is great.

2.Because of its high separating factor, it can be dehydrated fully in the two drums.So the filter cake will contain less moist.

3.While there is a high demand to the purity of the products the centrifuge can wash them and drain out the washing liquid and the mother liquid separately.

4.Low and even consumption of the power.


Using scope

This type of centrifuge is well used to separate suspension with its solid size is over 0.1mm and density is over 30%.It can be used in chemical,light,pharmacy and food industry to produce sodium chloride ammonium fluoride ammonium bicarbonate,sodium sulphate,urea,caffeine,polyethylene,polystyrene, oxalate,nitrate.


The choice of HR pistons pushing centrifuge

1.If the customer has high requirements on moisture content of filter cake,washing effect and working capacity.

2.The density of the suspension should be within 30%-80%(weight percentage);ten even product particle size is over 0.1mm and its viscosity should be less than 10-1pa.s .You can choose HR pistons pushing centrifuge concerning above Conditions.


Other configuration choices

1.Material:product contact parts can be common stainless steel special stainless steel,copper alloy,titanium and etc.

2.Motor:you can choose common motor or explosive-proof motor.

3.Draining means:you can choose to drain the mother liquid and the washing liquid separately or together.

4.Clearance of the filter net:0.08-0.40mm.

5. Can be designed and manufactured according to GMP requirements.

6.Other requirements.